U Mobile APN Settings (Malaysia)

Configure U Mobile mobile data on your phone with APN internet. These settings cover 4G LTE and 5G data on Android and iOS devices in Malaysia. Use this guide when your phone fails to auto-detect carrier settings, after a SIM swap, or when troubleshooting "no internet" errors on mobile data.

U Mobile APN settings

APNinternet

U Mobile uses a minimal APN configuration: only the APN field is required. Username, password, MCC, and MNC are auto-detected from your SIM card by both Android and iOS.

Configure U Mobile APN on Android

  1. Open Settings on your Android device.
  2. Tap Network & internet (or Connections on Samsung) → Mobile network → Advanced → Access Point Names.
  3. Tap the + icon (or the menu) to create a new APN profile.
  4. Enter Name: U Mobile.
  5. Enter APN: internet.
  6. Leave the remaining fields at their defaults unless your carrier provides specific values.
  7. Tap the three-dot menu → Save.
  8. Return to the APN list and select the U Mobile profile (tap the radio button next to it).
  9. Toggle airplane mode on, wait 10 seconds, toggle it off to force the new APN to take effect.

Configure U Mobile APN on iPhone

  1. Open Settings on your iPhone.
  2. Tap Cellular (or Mobile Data outside the US) → Cellular Data Network.
  3. If this menu is missing, your carrier has locked APN editing on this iPhone model — see troubleshooting below.
  4. Under the Cellular Data section, enter APN: internet.
  5. Scroll down and configure the same values under LTE Setup (Optional) and MMS sections to ensure SMS picture messaging works.
  6. Return to the Settings root. The new APN takes effect within 30 seconds — no reboot needed.
  7. If data is still not working after 60 seconds, toggle airplane mode on and off.

U Mobile APN troubleshooting

  1. No data after saving APN. Verify the APN value matches exactly — APN strings are case-sensitive on some Android builds. Common typo: internet typed with a trailing space.
  2. "Cellular Data Network" menu missing on iPhone. Your carrier locked APN editing. Reset network settings via Settings → General → Transfer or Reset iPhone → Reset → Reset Network Settings. If still missing, the SIM profile is hard-locked and you must use the carrier's auto-config (request a "carrier settings update" notification by inserting the SIM).
  3. Data works but MMS fails. MMS uses a separate APN configuration. On Android, create a second APN entry with APN type mms. On iPhone, fill in the MMS section under Cellular Data Network with the same APN value.
  4. 4G/5G icon shows but no internet. Toggle airplane mode, then check that Mobile Data is enabled and that Data Roaming is on if you're traveling. Some U Mobile plans require Data Roaming even on the home network during specific tower handovers.
  5. APN reverts after reboot. Long-press the APN profile and pick Set as default. If the carrier's auto-config keeps overwriting it, disable Auto-select carrier settings in mobile network settings before saving.

Other Malaysia carrier APN settings