Globe Router Login

How to Login to Your Globe Telecom Router

Globe Telecom, operated by Globe Telecom Inc., runs Globe At Home, one of the two largest fixed-broadband services in the Philippines next to PLDT. Connect a device to the Globe At Home network over Wi-Fi or a LAN cable, open a browser, and enter the gateway 192.168.254.254 in the address bar.

That address is the giveaway quirk of a Globe line. Where most providers sit on 192.168.1.1, Globe places its gateway at 192.168.254.254 so the supplied unit avoids clashing with third-party routers wired behind it.

When the login screen loads, the credential that works on most Globe units is the username user with the password @l03e1t3. Many Huawei-branded Globe modems print the password on the label; older units used globe plus the last six characters of the MAC address, or the legacy tattoo@home from the old Tattoo@Home line. Newer firmware accepts admin as the username, and every unit also carries a sticker on its underside listing the exact login for that serial.

The GlobeAtHome app is the no-browser route. Signed in with your Globe-registered number, it surfaces your Wi-Fi name and password and lets you change them, so it doubles as a fallback when the web login is rejected.

Globe Router Models and Default Settings

Globe ships a compact lineup of ONT-router units across its fibre and legacy DSL plans. Each one answers on the same 192.168.254.254 gateway:

Router Model	Default IP	Username	Password	Notes
Huawei HG8145V5	192.168.254.254	user or admin	@l03e1t3, label, or legacy tattoo@home	Most common fibre ONT
Huawei EG8145V5	192.168.254.254	user or admin	@l03e1t3	Newer installations
ZTE F670L	192.168.254.254	user or admin	@l03e1t3	Dual-band, Wi-Fi 6
ZTE F609	192.168.254.254	user	@l03e1t3	Older DSL unit
Huawei HG8245H	192.168.254.254	admin	On router label	Legacy fibre model

The Huawei HG8145V5 is the unit most Globe At Home fibre subscribers receive, acting as the optical terminal and router in one box; its broader admin behaviour is covered in the Huawei router login guide. The ZTE F670L is the later Wi-Fi 6 option, and the ZTE router login guide lists its panel layout. Globe Telecom is a unit of the Ayala group, which underwrites the rolling fibre buildout behind these deployments.

Changing Your Globe Wi-Fi Password

The label password ships visible to anyone within reach of the router, so resetting it is the first thing to do after activation. The steps below follow the Huawei HG8145V5 panel.

After logging in at 192.168.254.254, open WLAN and then SSID Configuration, where the 2.4 GHz and 5 GHz radios are listed side by side.

Pick the radio you want to edit. Rename the SSID Name away from the factory string (Globe ships these as GLOBE plus a short suffix) and type a fresh key into the WPA PreSharedKey box. Twelve characters or more is the floor; skip anything guessable like a mobile number or street address.

Hit Apply. Every device drops off and has to rejoin with the new key, so repeat the edit on the second band if you want both to share one password.

The GlobeAtHome app reaches the same setting under Manage Wi-Fi, where one field updates the key directly. For the cross-brand walkthrough, see our Wi-Fi password change guide.

Using Your Own Router with Globe At Home

A Globe At Home box can sit in front of your own router because it already handles the fibre handshake; your router only has to run the local network behind it.

Quick wiring (double NAT): leave the Globe unit powered, run an Ethernet lead from one of its LAN ports into your router’s WAN port, and set that WAN to DHCP. The two NAT layers are fine for browsing and streaming, though port forwarding and some online games need the cleaner path below.

Bridge mode (advanced): at 192.168.254.254, open WAN Configuration and switch the mode from Route to Bridge, then cable your router’s WAN port to LAN port 1 on the Globe device. Globe locks the bridge toggle behind elevated access on several models, so if the option is greyed out your firmware needs the higher-tier credential for that unit.

Troubleshooting Globe Router Issues

The recurring Globe At Home faults and their fixes:

1. Admin page will not open. Confirm you typed 192.168.254.254, not 192.168.1.1 or 192.168.1.254. A wired LAN link is steadier than Wi-Fi for this, and prefixing the address as http://192.168.254.254 stops the browser treating it as a search.

2. Login keeps failing. Cycle through user / @l03e1t3, the Huawei user / tattoo@home, and admin / admin before anything drastic. The GlobeAtHome app can re-read the active password, and a factory reset (hold the rear button 15 seconds) clears a forgotten one.

3. Linked but offline. Pull the power for 30 seconds, then watch for a steady green light on reboot. If the connection stays dead, raise it on the GlobeAtHome app or ring Globe on 211.

4. Wi-Fi running slow. Run a wired speed test first; if the cable hits your plan rate, the wireless side is the limit. The compact Huawei and ZTE ONTs struggle through concrete, so a central spot plus a mesh node clears most dead zones.

5. Red LOS light. A lit LOS lamp signals lost fibre signal. Trace the fibre lead from the wall socket to the ONT for kinks or a loose seat, never bending it sharply, then report the line through the app or on 211 if the cable looks intact.

6. App cannot see the router. The GlobeAtHome app talks to the unit over the local network, so put your phone on the Globe Wi-Fi rather than mobile data, and relaunch the app if discovery hangs.

Globe sits in our wider set of Philippines ISP router login guides on HanoiLUG. To weigh it against the local rivals, see Globe vs PLDT and Globe vs Smart.