PLDT Router Login

PLDT Inc. (formerly Philippine Long Distance Telephone Company) is the largest broadband provider in the Philippines. The company operates PLDT Home Fibr, a fibre-to-the-home service available in Metro Manila and expanding to provinces. Fiber Unli plans range from 35Mbps at P899/month to 1Gbps at P9,499/month, all with a 36-month lock-in period.

How to Login to Your PLDT Router

Join the PLDTHOMEFIBR network over Wi-Fi, or plug into a LAN port for a steadier session. Point any browser at 192.168.1.1. Which login page you land on depends on the brand of your supplied unit:

• Fiberhome models: Type 192.168.1.1/fh in the address bar
• ZTE models: Type 192.168.1.1/ZTE in the address bar
• Huawei models: Type 192.168.1.1 (standard, no suffix)
• Baudtec models: Type 192.168.1.1/super.htm

PLDT Ultera fixed-wireless units are the exception. Those use 192.168.15.1 as the gateway, not 192.168.1.1.

For basic access, enter admin as the username and 1234567890 as the password. If that does not work, try admin/admin.

For full access to bridge mode, port forwarding, and advanced settings, use the adminpldt account. The adminpldt password varies by model and firmware version. See the credentials table below.

If the brand suffix page refuses to load, confirm your phone or laptop is joined to the PLDTHOMEFIBR network rather than mobile data. Prefix the address with http:// or https://. For the adminpldt panel especially, a wired LAN connection holds the session better than Wi-Fi during bridge-mode changes.

PLDT Router Models and Default Settings

The provider has three admin access levels: admin (basic), adminpldt (full access), and superadmin (root, Fiberhome only). The adminpldt account is what most subscribers need for bridge mode and DNS changes.

Fiberhome models (most common):

Router Model	Admin Login URL	adminpldt Password	Notes
Fiberhome HG6145F1 (RP4295)	192.168.1.1/fh	Mj5UI3OPr9vYq8bCxl1rV50E	Current model
Fiberhome HG6154D2	192.168.1.1/fh	Mj5UI3OPr9vYq8bCxl1rV50E	Current model
Fiberhome RP2920/RP2931/RP2932	192.168.1.1/fh	Mj5UI3OPr9vYq8bCxl1rV50E	Current firmware
Fiberhome RP4423	192.168.1.1/fh	Mj5UI3OPr9vYq8bCxl1rV50E	Newer revision
Fiberhome AN5506-04-FA (RP2646)	192.168.1.1/fh	z6dUABtl270qRxt7a2uGTiw	Legacy
Fiberhome AN5506-04-FAT (RP2627)	192.168.1.1/fh	6GFJdY4aAuUKJjdtSn7dC2x	Legacy
Fiberhome AN5506-04-F (RP2613)	192.168.1.1/fh	6GFJdY4aAuUKJjdtSn7dC2x	Legacy

Huawei models:

Router Model	Admin Login URL	adminpldt Password	Notes
Huawei HG8145V5	192.168.1.1/admin.html	AC2DIU7QW3ERTY6UPAS4DFG	Common on newer plans
Huawei HG8145X6-10	192.168.1.1/admin.html	AC2DIU7QW3ERTY6UPAS4DFG	WiFi 6 model
Huawei HG8245A/Q/U	192.168.1.1	1234567890	Legacy, also try telecomadmin/admintelecom
Huawei HG8145V	192.168.1.1	1234567890	Legacy

ZTE models:

Router Model	Admin Login URL	adminpldt Password	Notes
ZTE F670L	192.168.1.1/PLDTadminLogin	HL1EU9804BKjTa6734uP370	Common ZTE model
ZTE (generic)	192.168.1.1/ZTE	8DEYu5BrtHePtfhRsuTnYHN	Older ZTE units

Other brands:

Router Model	Admin Login URL	adminpldt Password
Baudtec RN243R4-A6	192.168.1.1/super.htm	qVuUKLmCJJhCF4YY3x9xqJy
Baudtec RN104VR4GCH-2S-A3	192.168.1.1/admin/super.asp	qVuUKLmCJJhCF4YY3x9xqJy
Prolink PRS1241B	192.168.1.1/pldtadmincel.htm	8d32f84964abbc7a6097e43
Prolink PRS1841U	192.168.1.1/admin/pldt.asp	8d32f84964abbc7a6097e43
Zyxel AMG1302-T10D	192.168.1.1	zoxm41upyj/3wj/3g42j4wk
C-DATA ONT4GE2P2WR	192.168.1.1/Cdata	asdfghjklqwertzuiopyxcv
PLDT Home WiFi R051	192.168.1.1	pldthome (no username)

The provider changes adminpldt passwords through OTA (over-the-air) firmware updates. If the passwords above do not work, your firmware may have been updated. The username adminpldt remains the same across all models. A factory reset restores the original firmware password but may require calling 171 to restore your internet connection.

PLDT Fiber Unli Plans

Current postpaid plans (36-month lock-in):

Plan	Speed	Price/month	Speed Boost (first 6 months)
Fiber Unli 899	35 Mbps	P899	None
Fiber Unli 1299	50 Mbps	P1,299	100 Mbps
Fiber Unli 1699	300 Mbps	P1,699	500 Mbps
Fiber Unli 2099	500 Mbps	P2,099	700 Mbps
Fiber Unli 2699	700 Mbps	P2,699	1 Gbps
Fiber Unli 9499	1 Gbps	P9,499	None

Plans from P1,699 and above include free mobile-to-mobile and mobile-to-landline calls to up to 5 nominated Smart and TNT numbers. All plans include a landline. Installation fee is P3,600.

Fiber Unli All plans (broadband + entertainment):

Plan	Speed	Price/month	Inclusions
Fiber Unli All 1399	100 Mbps	P1,399	Cignal (61 SD + 14 HD channels)
Fiber Unli All 1799	300 Mbps	P1,799	Cignal + calling
Fiber Unli All 2499	500 Mbps	P2,499	Cignal + Netflix Standard
Fiber Unli All 3199	1 Gbps	P3,199	Cignal + Netflix + HBO Max

Fiber Prepaid is also available from P50 for subscribers who prefer no lock-in. Prepaid plans use the same router and fibre line but with time-limited or data-limited access.

WiFi 6 Mesh System

The provider offers the TP-Link Deco X55 as a WiFi 6 mesh add-on. It is available on any Fiber Unli plan for P199/month per unit.

Three Deco X55 units cover up to 700 square metres, enough for a large multi-storey Filipino home. Each unit is dual-band (2.4GHz + 5GHz) with WiFi 6 features: OFDMA for simultaneous multi-device transmission, MU-MIMO for efficient bandwidth distribution, BSS Coloring to reduce interference from neighbouring networks, and 160MHz channel width on the 5GHz band.

The mesh units connect to the existing PLDT modem via ethernet or wirelessly. They create a single network that devices roam between automatically. Place units in different rooms or floors for best coverage.

WiFi 7 Router

The TP-Link BE230 is a dual-band WiFi 7 router available to subscribers on Fiber Plan 2699 and above. It costs P5,290 (discounted from P5,990) through the Next Upgrade Shop.

WiFi 7 features on the BE230 include 4K QAM (4096 QAM) for higher data encoding density, Multi-Link Operation (MLO) for reduced latency across bands, and MU-MIMO supporting up to 16 streams. The 6GHz band is not yet available in the Philippines, so the BE230 operates in dual-band mode (2.4GHz + 5GHz) for now.

Changing Your PLDT Wi-Fi Password

The default SSID on most units is “PLDTHOMEFIBR” followed by random characters, and the default Wi-Fi password (1234567890) is widely known. Change it immediately after installation.

Sign in at 192.168.1.1 (append /fh on Fiberhome units). On the PLDT firmware, open Network from the top menu, then WLAN or Wireless Settings, and pick the SSID Configuration tab.

Rename the SSID away from the factory PLDTHOMEFIBR string so neighbours cannot identify your unit. Drop your new key into the WPA PreSharedKey field. Twelve characters or more is sensible; skip anything guessable like a birthday, mobile number, or barangay name.

Hit Apply. Every connected device drops off. The 2.4GHz and 5GHz radios carry separate keys on Fiberhome and Huawei units, so repeat the step on each band.

Our Wi-Fi password change guide walks through the same steps for other router brands.

Using Your Own Router with PLDT Home Fibr

The supplied device handles fibre authentication, so your personal router just handles routing and Wi-Fi.

Option 1: Double NAT (simple setup)

Keep the supplied router connected. Plug your own router’s WAN port into a LAN port on the PLDT device. Set your router’s WAN to DHCP. This creates a double NAT, which is fine for browsing and streaming. Gaming or hosting servers may have issues.

Option 2: Bridge mode (recommended)

Log in with the adminpldt account (see credentials table above). Look for WAN Connection or Internet Settings. Change the connection type from Route to Bridge. Save and restart. Connect your own router’s WAN port to the device’s LAN port 1. Set WAN to DHCP.

Bridge mode access is sometimes restricted on the basic admin account. You need the adminpldt account for this setting. If bridge mode is grayed out, try accessing via the brand-specific URL (e.g., 192.168.1.1/fh for Fiberhome models).

Subscribers weighing the country’s two largest networks before committing to a router often read our Globe vs PLDT speed and price comparison. For the full set of Philippines ISP router login guides, including the Globe At Home router login on the rival fibre network, HanoiLUG keeps a per-provider index.

Troubleshooting PLDT Router Issues

These are the faults PLDT Home Fibr subscribers raise most often on the 171 hotline, with the fix for each.

1. Login page does not load. The usual cause is the wrong brand suffix. Match the URL to your hardware: 192.168.1.1/fh for Fiberhome, 192.168.1.1/ZTE for ZTE, plain 192.168.1.1 for Huawei, and confirm you are on the fibre network rather than a mobile hotspot. A LAN cable bypasses flaky Wi-Fi during admin work.

2. Password rejected. The provider changes adminpldt passwords via OTA updates. Try the passwords in the credentials table above. For Huawei models, also try telecomadmin/admintelecom; for ZTE units the login URL is 192.168.1.1/PLDTadminLogin rather than a password change. A factory reset (hold reset button 15 seconds) restores original firmware defaults, but you may need to call 171 to restore internet.

3. Connected but no internet. Unplug the unit for a full 30 seconds before powering it back on. Reseat the fibre patch cord at both ends. If the line stays dead, raise it on 171 or log a ticket inside the MyPLDT Home app.

4. Slow Wi-Fi speeds. Run a wired speed test first. When the cable hits your plan figure but Wi-Fi lags behind, the radio is the limit, not the line. Fiberhome ONTs throw a short signal through the concrete walls common in Filipino homes, so centre the unit or add the TP-Link Deco X55 mesh (P199/month per node) to fill the dead spots.

5. Red LOS light. A red LOS indicator points to a broken fibre path. Trace the cord from the wall socket to the ONT and check for sharp bends, which crack the glass core. Report a persistent LOS on 171 or via the MyPLDT Home app.

6. Internet drops during rain. Common in areas where the provider uses older aerial fibre cables. Water affects splice points and connectors. Report repeated rain-related outages at 171.